Rollover any small picture above to change, click small image for hi-res view.

Brand new from the MIP Racers Series - Introducing the MIP Pro4mance™ Chassis and Tuning Package designed for use with both the Losi TEN-SCTe 4x4 Offroad Rolling Chassis (LOSB0127) and the Losi TEN_SCTe RTR Chassis (LOSB0128).  

14X Winner Pro4 Class by MIP/Olson:
Motorama!
JConcepts Winter Nationals!
Venom Offroad Jam!
CRCRC Winter Mid-West Electric Off-Road Championships!
IERC's Toys for Tots!
TLR Electric Buffet!
JConcepts Series Finals!
Short Course Showdown!
JConcepts Clash!
JConcepts Fall Nationals!
Proline Surf City Classic!
JBRL Rd5!
JConcepts Summer Nationals!
Top Gun Shootout!

Rave Reviews:

RC Car Action Mag, RC Driver Mag, Velocity RC Mag, HorizonHobby.com
BIG SQUID approved HALL OF FAME!

Our package is more than just a chassis replacement.  It’s a performance package, tuned by the MIP bold engineering team, that converts the Losi SCTE into an MIP Pro4 Tuned Race Truck!  This kit shaves off nearly 8 ounces of weight and rebalances the truck to give a stable smooth drive.  All done with the re-engineered paintable chassis and cowling, shock towers, front springs and our MIP Bypass1™ pistons and valves.  Each component in the assembly is manufactured in America using US grade material.  When your Losi Ten-SCTE hits the track outfitted with the MIP Pro4mance Pack™ including the patent-pending RealShocks MIP Bypass1™, you will find your tuned ride engineered for maximum performance and control!

Don’t settle for a replacement chassis. Buy MIP and own perfection.

GALLERY: Click for Videos, Races, Build Photos, Testimonials, Reviews 

SET-UPs: Click for Winning Factory Team & Racers Setups - Share YOURS by Instant-Upload!

SPECS:

Length: 21.34 inch (524mm)

Width: 11.65 inch (295.8mm)

Wheelbase:  13.15 inch (334mm)

Stock Weight: 6.75 lb (3.06 kg)

Cowling: Clear Genuine Lexan® (Registered Trademark of GE Plastics/SABID IP)

FEATURES: 

• 7075 U.S. machined chassis; 12% lighter than the stock chassis!

• Powder coated chassis to bring color and life to your vehicle!

• Re-configured Center-Diff, Battery Tray, ESC, & Servo for superb vehicle balance!

• Light weight Battery Blocks and Pocketed chassis for better traction & stability!

• MIP High-Pitch Tuned Front Shock Springs! Comes with 3 different rates!

• MIP Carbon-Fiber Hybrid Graphite Tuned Shock Towers provide proper mechanical use of shock and spring to give the truck stability while controlling suspension motion!

• MIP's Patent-Pending Bypass1™ Technology included! MIP has dedicated a site to highlight the innovative technology behind the patents-pending MIP Bypass1™ line of shock piston and adjustable valving systems inspired by full scale trophy trucks, visit http://RealShocks.com for more information.

• Dubro & Lunsford Steering components allow full 1.8 travel of suspension without binding!  

• Billet Servo Mounts provide a more solid installation lower in the chassis!

• MIP Cowling provides excellent protection for your center diff as well as your electronics! It can also be painted and stickered!

• All necessary hardware included for a 1-stop shop to performance!

• 100% Quality made in the USA!

 Pretty.  Swift.   Made to Race.  Made to WIN! 

 

REQUIRES: 

MIP Part Number 12200 is designed for use with both Losi TEN-SCTe Rolling Chassis (LOSB0127) and Losi TEN-SCTe RTR Chassis (LOSB0128).  

You will need one of the above LosiTen-SCTE 1:10 Scale Electric 4wd Short Course Truck Chassis with body, wheels, tires, shocks.  Plus separate purchase of Electronic Speed Control, 550-sized Motor, Charger, Servo, Mod 1 Pinion Gear, 2-Channel Radio, servo tape, tools for assembly (small flat blade and Phillips screwdrivers, Needle-nose Pliers).  You will also need quality .050-inch, 1/16-inch, 5/64-inch, 3/32-inch, 1.5mm, and 2.5mm hex (Allen) drivers - we recommend MIP Thorp Hex drivers and SpeedTip Wrenches from http://MIPonline.com.

 

INCLUDES:

THE CHASSIS: The MIP Pro4-mance Package Chassis Palette is machined locally from USA 7075 aircraft aluminum, powder-coated for a clean high-tech look, and paintable.  The configuration offers more than just rearward battery and motor positioning  - MIP engineers built the specific tuning nuances of your Losi Ten-SCTE right into the streamlined chassis design that rebalances the weight bias front-to-rear and reconfigures the overall balance left-to-right. 

PAINTABLE CLEAR COWLING:  MIP brings fun and function under the hood with the new protective dirt-shielding Lexan® polycarbonate cowling to cover the front and gear area.  Shipped clear, ready to paint, skin, airbrush, and decal.

PISTON THEORY: MIP Bypass1™ RealShocks Pistons inside prevents packing and allows racers infinite driver set-ups for max traction and control. Change your piston, change your ride!  For more on MIP’s pioneering the first true trophy-truck bypass technology for RC, visit http://RealShocks.com 

SHOCK TOWERS: Custom Hybrid Carbon-Fiber MIP Shock Towers provide proper mechanical use of shock and spring to give the truck stability while controlling suspension motion. 

SPRING THEORY: MIP has developed a spring package to match our MIP Pro4-mance Package for the Losi Ten-SCTE.  Our springs are custom coiled to the exact length and rate. Each kit comes with 3 sets of front springs - soft, med, and firm, allowing racers to adjust the set-up perfectly for any track condition.

STEERING LINKAGE:  MIP has re-engineered the steering linkage with real Du-Bro Rod Ends and genuine Lunsford Turnbuckles.  Our combination of quality USA-made steering components and hardware allow full suspension and movement in steering without binding.

BATTERY PAD: Our MIP Pack Pal™ is made of ultra-thin closed cell foam pad to secure your battery.

BATTERY BOX: Light-weight Battery Blocks of Custom Color-Anodized aluminum position your standard 2 cell pack with stock Velcro straps.

ANODIZED BRACING HARDWARE: Featuring Custom Color-Anodized aircraft aluminum, MIP Braces add strength and style without compromising weight.

SERVO MOUNTS: Custom Color-Anodized MIP Steering Posts of aluminum are included to reconfigure the truck's balance and shave weight.

SERVO TAPE: One piece of Double-Sided MIP Servo Tape included!  MIP MXT-1 Tape bonds like glue, yet peels off in one piece with one pull and leaves no residue behind.  More at http://MIPonline.com/store/08117.html

 

 

BUILDING TIPS:

MIP suggests using MIP Servo Tape, and MIP Thorp Hex Drivers and MIP SpeedTip Wrenches.

 

INSTRUCTIONS: 

 

 LOSI FACTORY SUPPORT PARTS:  



 

MIP SUPPORT PARTS:  

MIP continues to assure supporting spare parts are available separately.

#8117 MIP MX-T Servo Tape (2) $4.00

#12123 MIP Bypass1™ Pistons No.4 (2) $10.00

#12124 MIP Bypass1™ No.SW4 Stop Washer (2) $3.00

#12125 MIP Bypass1™, No.13 Valves, .003 Green (6) $6.00

#12126 MIP Bypass1™, No.14 Valves, .004 Tan (6) $6.00

#12127 MIP Bypass1™, No.15 Valves, .005 Blue (6) $6.00

#12128 MIP Bypass1™, No.16 Valves, .007 Matte (4) $6.00

#12129 MIP Bypass1™, No.17 Valves, .010 Brown (4) $6.00

#12130 MIP Bypass1™, No.18 Valves, .015 Pink (4) $6.00

#12201 MIP Chassis Palette (1) $140.00

#12202 MIP Cowling (1) $10.00

#12203 MIP Hybrid Tower, Front (1) $22.00

#12204 MIP Hybrid Tower, Rear (1) $25.00

#12205 MIP Battery Mounts (4) $25.00

#12206 MIP Chassis Brace, Front (1) $12.00

#12207 MIP Chassis Brace, Rear (1) $12.00

#12208 MIP Servo Mounts (4) $16.00

#12209 MIP Antenna Mount (1) $6.00

#12210 MIP Pack Pal™ Battery Pad (1) $4.00

#12211 MIP Springs Front Blue/SOFT (2) $7.00

#12212 MIP Springs Front Yellow/MEDIUM (2) $7.00

#12213 MIP Springs Front Red/FIRM (2) $7.00

#12214 MIP Pro4mance Decal Sheet (1) $5.00

#99029 HW-SHSS/ 4-40 x 1/8in Flat Point (10) $3.50

#99042 HW-NUT/ 4-40 Mini Lock Nut (4) $3.00

#99043 HW-FHCS/ 5-40 x 3/8in Flat Head Screw (8) $3.50

#99044 HW-FHCS/ 5/40 x 1/2in Flat Head Screw (8) $3.50

#99045 HW-BHCS/ 5-40 x 3/8in Button Head Screw (8) $3.50

#99046 HW-FHCS/ 4-40 x 3/4in Flat Head Screw (6) $3.50

#99047 HW-SHSS/ 5-40 x 7/8in Set Screw (2) $3.00

#99048 HW-NUT/ 5-40 Steel Lock Nut (4) $3.50

#99049 HW-WASHER/ 4-40 x .050 (3/16in) Angled Washer (4) $4.00

#99050 HW-WASHER/ 4-40 x .125 (1/4in) Angled Washer (2) $3.00

#99051 HW-WASHER/ No.5 Flat Washer (12) $3.00

#99052 HW-CLAMP/ 3/8in Wire Clamp (2) $3.00

#99053 HW-ROD-END/ 4-40 Dubro Rod-Ends (4) $5.00

#99054 HW-TURNBUCKLE/ 2.375in Lunsford Titanium Turnbuckles (2) $10.00

#99055 HW-FHCS/ 8-32 x 3/8in Flat Head Screw (6) $3.00