Since 1978 MIP has pushed the limits in the RC World. When it comes to creative and innovative products, such as the CVD™ axle, RC10 4x4 conversion, Bypass1™ Piston, SCTE Pro4mance™ package, newly released Pucks™ Drive system, and for the first time an Upgrade Kit to convert a TLR-SCTE 2.0 4x4 Short Course into a Super Light 1/8th Scale e-Buggy! With the addition of MIP’s Pro8 Upgrade Kit the once 4x4 Short Course transforms into a competitive and agile 1/8th Super Lite e-Buggy that meets all specifications for width and length! The only difference is that it’s upwards of two pounds lighter when compared to the average 1/8th scales e-Buggy's on the market! To visualize the weight differential, it’s like removing a minimum of 162 of the seven gram square lead weights (commonly used in RC) off of the average 1/8th scale! The weight decrease makes this e-Buggy much more agile vs. its heavier competitor as well as puts less wear and tear on the race track, and increases turn marshal safety.
When Upgrading the TLR-SCTE 2.0 4x4 up to a 1/8th Super Lite, electronics are always a factor to consider, but with this product either SC 4x4 electronics or 1/8th scale electronics are compatible! You just have to decide what run-time you are trying to obtain.
7 minutes of runtime:
SC electronics: 2 cell - high Mah (Zombie 7200Mah)* / High KV SC motor (Tekin 4300Kv HD)*
12 minutes of runtime:
1/8th scale electronics: Small 4 cell - low Mah (Protek 3500Mah)* / Low KV SC or Indoor 1/8th scale motor (Tekin 1850HD / Tekin 1950 T8i)*
The time of heavy, dangerous, track wrecking, eight pound 1/8th scales is a thing of the past, time to look towards to the future - Super Light and Agile 1/8th Scales! MIP’s upgrade package for the Losi/TLR 2.0 can make that future a reality! Be sure to check out part #13300 on miponline.com!
*Electronics used for these run time statistics. Run times may vary with other products.
Racers looking to create a competitive Super Light 1/8th scale buggy
Increased Overall Agility
Increased Corner Speed
More Overall Air Control
Much Lighter than other 1/8th Scales
Taper lock 17mm hex adapters
17mm serrated wheel nuts
Narrow front hex adapters create more off-power steering
Anodized and laser marked 7075-T6 aluminum parts
4 mm glass / carbon hybrid front / rear towers
MIP Bypass1™ piston upgrade
Two pairs of tuned racing springs
Black oxide & wax coated body clips
Aluminum adjustable height rear body mounts
Machined aluminum front body mount
Custom MIP molded front bumper
Custom MIP molded wing mounts
Trim to fit Lexan mud guards
Online set up sheets
Technical support from MIP’s Factory Race Team
100% Made in the USA!
HW-SHSS 4-40 x 3/32 Cup Point (4), HW-BHCS 4-40 x 5/16 (1), HW-BHCS 5-40 x 3/8 (5), MIP Confetti Sticker (2), MIP RealShocks™ Valve Cup Sticker (2), HW-BHCS 5-40 x 3/4 Button Head Screw (8), HW-Pin 1/16 Body Clip Hair Pin Black (4), HW-Washer .29 x .56 x .09 Black rubber (4), HW-FHCS 4-40 x 1/4" Flat Head Screw (1), HW-SHSS, 5-40 x 1/4" Cup Set Screw (1), MIP Pro8™ Confetti Sticker (2), MIP Instructions Sheet (1), MIP Cover Sheet(1), MIP Mud Guard(2), MIP Real Shocks Valve Cup (1), MIP Bypass1™ #SW4 Stop Washer (4), MIP Bypass1™ #17 Valves .010 Brown (4), HW-Nut 4-40 Mini Locknut (4), MIP Pro4mance™ Springs Front Blue/SOFT (2), MIP Pro4mance™ Springs Front Yellow/MEDIUM (2), MIP Servo Post (2), MIP Servo Post Spacers (4), MIP Bypass1™ #7 Pistons (4), MIP Pro8™ e-Buggy Tower Rear (1), MIP Pro8™ e-Buggy Tower Front (1), MIP Rear Body Mount adapter (1), MIP Body Mounts (2), MIP Front 17 mm Hub (2), MIP Front M4 Serrated 17mm Flanged Nut (2), MIP Rear 17mm Hub (2), MIP Wing Mount (2), MIP Front Bumper (1), MIP Rear M4 Serrated 17mm Flanged Nut (2).
.050 Allen Key – (Suggest #9000 MIP Hex Driver Wrench .050 inch.)
1/16 Allen Key – (Suggest #9001 MIP Hex Driver Wrench 1/16 inch.)
5/64 Allen Key – (Suggest #9002 MIP Hex Driver Wrench 5/64 inch.)
(See links below for support kit items.)
Safety Data at http://miponline.com/store/msds.html
Hi Res Images at http://www.miponline.com/store/media/myparts/ or click any image herein.
*Not Responsible for typographical errors
TQ/Winner/Fastest Lap 1:8 4WD e-Buggy North East Indoor Champs (NEIC)
TQ/3rd/Fastest Lap 1:8 Canadian Offroad Nationals in Ottawa
TQ 1:8 Top Gun Shootout
MIP Pro8 e-Buggy Upgrade Kit, TLR-SCTE 2.0 #13300 *Discontinued*1
Write a review | Read all reviews
Featured positive reviews:
MIP Pro8 e-Buggy Upgrade Kit, TLR-SCTE 2.0 #13300 *Discontinued*
Great product, outstanding quality. Easy to install and works awesome
Your MIP Race Bag
Add These Related Products!