M O O R E ' S   I D E A L   P R O D U C T S  L L C             Since 1978              Race Proven World and National Champions!
  
mip-part-14355d
mip-part-14355d mip-inst-14355_p1 mip-inst-14355_p2 mip-part-14355p1

MIP 1/5th Scale 54mm Racing Clutch, 8-shoe, #14355, *Discontinued*

MIP 1/5th Scale 54mm Racing Clutch, 8-shoe, #14355, *Discontinued*
Average rating:
Write a review | Read all reviews

14355
Discontinued

Please contact modrccar@gmail.com to purchase product

More Details

*IMPORTANT: #14355 MIP 1/5th Scale 54mm Racing Clutch was desgin for 32cc and lower engines. Some engines vary on backspacing of crankshaft length so if you have had to modify the original clutch backplate to be accepted on an aftermarket engine than the MIP clutch may not be compatible. The dimensions used for the backspacing of the MIP Racing Clutch were based off of the stock Losi 1/5th scale clutch and backplate. 

A NEW clutch bell is needed when installing your new MIP 1/5th Scale, 54mm Racing Clutch 8-shoe

button-supportkit.png

#14355 MIP 1/5th Scale, 54mm Racing Clutch, 8-Shoe

MSRP: $150.00

UPC: 691545143552

           

 PRODUCT DESCRIPTION:

LONGER-LASTING, PUNCHIER, LIGHTER, and REBUILDABLE! These four descriptive words embody what MIP’s new 1/5th scale clutch is all about. As any well aware and conscientious 1/5 scalier knows, the stock clutch is non-rebuildable, its heavy, loses its edge in the first 15 minutes and fades quickly after, and most of all it takes a long time for the motor to spool up and the clutch to engage properly. With all these downfalls and swapping out $30 clutches every couple heats, it was much past due for a little MIP Magic. With months of direct input from MIP’s Engineering and Race Team we have come up with a true racing clutch that is superior to that of the stock clutch. MIP’s 1/5th Scale 54mm Racing Clutch hits harder faster, its shoe longevity is vastly improved, and when shoes and springs do wear out, there’s no need to ditch the entire assembly as it is completely rebuildable! It’s not a question as to whether you need this clutch, but rather are you going to have it before your competition does? We welcome you to an all-new 1/5thscale reality; MIP’s reality!

 

TARGET CUSTOMERS:

1/5th Scale Customers

 

COMPETITIVE ADVANTAGES: (When compared to OEM clutch)

Quicker acceleration

50% less rotating mass

Shoe Longevity is vastly improved

Clutch fade is little to non-existent

Clutch hits harder faster

 

FEATURES:

7075 aluminum construct

8-Shoe design

4, 6, or 8 shoe adjustability

Completely rebuildable

100% Made in the USA

 

INCLUDES:

MIP Confetti Sticker (2), MIP Instructions Sheet (1), SHCS M6 x 16mm Cap Screw (1), BHCS M3 x 6mm Button Head Screw (4), Spring 0-Deg Clutch (8), SHSS M12 X 12mm Set Screw (1), MIP Aluminum Flywheel (1), MIP Clutch retainer Plate (1), MIP Clutch Shoe (8), MIP Blue Thread Gel (1)

 

REQUIRES TOOLS:

2.0mm Allen Key – #9008 MIP Hex Driver Wrench 2.0mm

4.0mm Allen Key

5.0mm Allen Key

6.0mm Allen Key

Hook Tool/L-Key (3/32 or smaller)

 

SUGGESTED TOOLS:

Flywheel Puller (Suggest: HPI  #Z965)

Piston Stop (Suggest: HPI  #Z966)

 

COMPATIBILITY:

Engines that except 54mm clutches*, 1/5 Losi 5ive-T 4WD Off-Road Truck (#LOSB0019), Losi 1/5 Desert Buggy (LOS05001), Losi 1/5 MINI WRC 4wd Rally Car RTR (LOS05007), 1/5 Redcat Rampage Series, Zenoah 1/5 scale engines*,  Bartolone Racing 1/5 scale engines*, OBR Engines*.

 

*IMPORTANT: #14355 MIP 1/5th Scale 54mm Racing Clutch was desgin for 32cc and lower engines. Some engines vary on backspacing of crankshaft length so if you have had to modify the original clutch backplate to be accepted on an aftermarket engine than the MIP clutch may not be compatible. The dimensions used for the backspacing of the MIP Racing Clutch were based off of the stock Losi 1/5th scale clutch and backplate. 

A new clutch bell is needed when installing your new MIP 1/5th Scale, 54mm Racing Clutch 8-shoe

  

SUPPORT PRODUCTS:

#14356 MIP 1/5 Scale, 54mm Racing Clutch Shoes (8) MSRP: $65.00 UPC: 691545143569

#14357 MIP 1/5 Scale, 54mm Racing Clutch Flywheel (1) MSRP: $75.00 UPC: 691545143576

#14358 MIP 1/5 Scale, 54mm Racing Clutch Retainer Plate (1) MSRP: $15.00 UPC: 691545143583

#14359 MIP 1/5 Scale, 54mm Racing Clutch Springs (8) MSRP: $15.00 UPC: 691545143590

#99088 HW-SHCS, M6 x 16mm Cap Screw (4) MSRP: $3.00 UPC: 691545990880

#99089 HW-SHSS, M12 x 12mm Set Screw (4) MSRP: $4.00 UPC: 691545990897

#99090 HW-BHCS, M3 x 6mm Button Head Screw (8) MSRP: $3.50 UPC: 691545990903

  

Safety Data at http://miponline.com/store/msds.html 

Hi Res Images at http://www.miponline.com/store/media/myparts/  or click any image herein.  

 
*Not Responsible for typographical errors

Reviews

MIP 1/5th Scale 54mm Racing Clutch, 8-shoe, #14355, *Discontinued*
Average rating:
  
1 reviews

Write a review | Read all reviews

Featured positive reviews:

MIP 1/5th Scale 54mm Racing Clutch, 8-shoe, #14355, *Discontinued*
Clutch is the S***
By 
This clutch has proven to be one of if not the best on the market. I have been running it for a year and am completely satisfied. Long lasting shoes and performance is out of this world. I would recommend this clutch to all 5th scales out there. Go with the best (MIP) and you will understand.
 

Support Parts:

mip-part-14354d
MIP 1/5th Scale, 54mm Racing Clutch Rebuild Kit #14354, *Discontinued*
MIP 1/5th Scale, 54mm Racing Clutch Rebuild Kit #14354, *Discontinued*
Average rating:
Add to Cart
mip-part-14356d
MIP 1/5th Scale, 54mm Racing Clutch Shoes (8) #14356 *Discontinued*
MIP 1/5th Scale, 54mm Racing Clutch Shoes (8) #14356 *Discontinued*
Average rating:
Add to Cart
mip-part-14357d
MIP 1/5th Scale, 54mm Racing Clutch Flywheel (1) #14357, *Discontinued*
Be the first one to write a review
Add to Cart
mip-part-14385d
MIP 1/5th Scale, 54mm Racing Clutch Retainer Plate (1) #14358, *Discontinued*
Be the first one to write a review
Add to Cart
mip-part-14359d
MIP 1/5th Scale, 54mm Racing Clutch Springs (8) #14359, *Discontinued*
MIP 1/5th Scale, 54mm Racing Clutch Springs (8) #14359, *Discontinued*
Average rating:
Add to Cart
mip-part-99088d
HW-SHCS, M6 x 16mm Cap Screw (4) #99088, *Discontinued*
Be the first one to write a review
Add to Cart
mip-part-99089d
HW-SHSS, M12 x 12mm Set Screw (4) #99089, *Discontinued*
Be the first one to write a review
Add to Cart
mip-part-99090d
HW-BHCS, M3 x 6mm Button Head Screw (8) #99090, *Discontinued*
Be the first one to write a review
Add to Cart

Your MIP Race Bag

Add These Related Products!

mip-part-09504
MIP Nut Driver Wrench Mega Bundle Set, Metric (5) 4.0mm, 5.0mm, 5.5mm, 7.0mm, & 8.0mm #9504 MSRP:$110.00 MAP: $82.50
$82.50
Add to Cart
mip-part-09505
MIP Nut Driver Wrench Set, SAE Standard (3), 3/16", 1/4", & 11/32" #9505 MSRP:$67.00
$50.25
Add to Cart
mip-part-09503
MIP Nut Driver Wrench Set, Metric (2), 5.5mm & 7.0mm #9503 MSRP:$44.00 MAP: $33.00
$33.00
Add to Cart
mip-part-09501
MIP Hex Driver Wrench Set, SAE Standard (4) , .050", 1/16", 5/64", & 3/32", #9501
$56.00
Add to Cart
mip-part-09502
MIP Hex Driver Wrench Set, Metric (3), 1.5mm, 2.0mm, & 2.5mm #9502
$42.00
Add to Cart
mip-part-09511
MIP Speed Tipô Hex Driver Wrench Set, SAE Standard (3), 1/16", 5/64", & 3/32" #9511
$39.00
Add to Cart
mip-part-09512
MIP Speed Tipô Hex Driver Wrench Set, Metric (3) 1.5mm, 2.0mm, & 2.5mm #9512
$39.00
Add to Cart
mip-part-8117d
MIP MXT-1 Servo Tape (2 pcs 1in x 5in) #08117 *Discontinued*
Add to Cart