#16060 MIP Roller Pucks™, Bi-Metal Shiny Drive System, AE B6/B5
So what is the downside to mod racing? Most would say nothing, it’s a man’s class, it’s what separates the men from the boys, and of course it’s what hits the pocket book and your drivetrain the most! First you have drivetrain wear, than you have a Sherman tanks worth of steel components as your main driving aide, and lastly with more weight comes less efficiency. And where there is a problem, MIP has a solution! Introducing MIP’s all New Bi-Metal Shiny Drive System! Featuring a never before seen two piece bi-metal outdrive that is comprised of both 7075–T6 aluminum and high grade heat tempered machine steel, this diff alone will shred 30% off of your OEM rotating mass, which equates to quicker acceleration without compromising strength. Being that the diff outputs are steel, it’s fully compatible with the highly successful MIP Roller Pucks™ which have a 360 degree wear pattern and of course are 100% replaceable! Ditch 30% of your rotating mass, keep more money in your pocket, say “NO” to replacing your bones and outdrives simultaneously, and say “YES” to MIP’s all new Bi-Metal Drive system for your modified 2wd buggy. Always Made 100% in the USA!
Serious racers looking for a competitive advantage on the track
Racers with 10.5 or higher motors
Less overall wear on drive components
Run lighter outdrives in your modified vehicle without destroying them
Replaceable Roller Pucks™ to keep drivetrain fresh
Race Prove C-CVD™ Construction
Two sets of holes in the C-CVD™ bell
100% Quality made in the USA!
MIP Confetti Sticker (2), MIP Inst. Sheet (1), MIP Thread Gel Safety Sheet (1), Support Parts Inst Sheet (1), 1-72x1/8 Button Head BHCS (4), 1/10th Modified MIP Roller Pucks(8), 1/10th Modified MIP Roller Puck Pin (3), Supplement Inst. (1), 10x12x1mm MIP Diff Spacer (4), MIP Inst Sheet Spacer (1), 6x8x1mm MIP Axle Spacer (2), 1/16” Chrome Steel Ball Bearing (7), Diff Ring Washer (2), 3/32” Gr. 25 Tungsten Carbide Diff Ball (14), #2 Hardened Washer (1), Diff Lube & Grease Cup (1), 1/4x9/32 Diff Spring (1), 2-56x.925 Shoulder Diff Screw (1), MIP Thrust Retainer (1), 5x8x2.5mm Bearing (2), .250 Bore MIP T-Nut Housing (1), .250 Bore MIP T-Nut Insert (1), MIP Lube & Thread Gel Cup (1), MIP Pucks R-CVD Shiny Bone (2), MIP Pucks Bi-Metal Outdrive Cup Male (1), MIP Pucks Bi-Metal Outdrive Cup Female (1), MIP Bi-Metal Outdrive Hub (2)
Stock diff gear (AE#91419), Axles (AE#91437), CVA Rebuild (AE#91438)
.050 inch Allen Key - (Suggest #9000 MIP Hex Driver Wrench .050 inch)
1.50 mm Allen Key - (Suggest #9007 MIP Hex Driver Wrench 1.50 mm)
2.00 mm Allen Key - (Suggest #9008 MIP Hex Driver Wrench 2.00 mm)
Team Associated RC10B5/RC10B5M (#90001/#90003)
Team Associated RC10 B6/B6D (#90011, #90012)
#15010 MIP Machined T-Nut, .250 MSRP: $10.00 MAP: $7.50 UPC: 691545150109
#15190 MIP Roller Pucks™ Refresh Kit MSRP: $14.00 MAP: $10.50 UPC: 691545151908
#16061 MIP Super Diff, Bi-Metal Hub, All AE 6/5 Series Vehicles (2) MSRP: $20.00 MAP: $15.00 UPC: 691545160610
#16062 MIP Roller Pucks™, Bi-Metal Outdrives, AE &TLR MSRP: $20.00 MAP: $15.00 UPC: 69154516027
#16065 MIP Super Diff, Bi-Metal Rebuild Kit w/ Carbide Diff Balls MSRP: $24.00 MAP: $18.00 UPC: 691545160658
#16085 MIP Pucks™/Rollers, Spacer Conversion AE B5 to B6 Series MSRP: $9.00 MAP: $6.75 UPC: 691545160856
#99061 HW- Bearing, 5x8x2.5mm (2) MSRP: $5.00 MAP: $3.75 UPC: 691545990613
#99064 HW-BHCS, 1-72x1/8 (6) MSRP: $3.00 MAP: $2.25 UPC: 691545990644
#99099 HW-Diff T-Nut Insert (2) MSRP: $6.00 MAP: $4.50 UPC: 691545990996
#99107 HW-Bearing, 3/32” Tungsten Carbide Ball (14) MSRP: $11.00 MAP: $8.25 UPC: 691545991078
#99109 HW- Spacer, 10mmx12mmx1mm Alum. (2) MSRP: $4.00 MAP: $3.00 UPC: 691545991092
Safety Data at http://miponline.com/store/msds.html
Hi Res Images at http://www.miponline.com/store/media/myparts/ or click any image herein.
*Not Responsible for typographical errors
Write a review | No reviews for this product.
Your MIP Race Bag
Add These Related Products!