Please note that this is a pre-order product. MIP must receive a minimum of 125 pre-orders by November 20 before production on the product is started. If the Pre-order goal is met, products will begin shipping out December 1. If the minimum amount of orders is not met by November 20th, then the product will not be manufactured and we will refund the full amount back to your account.
#17140 MIP Pucks™, 17.5 Drive System, All TLR 22 4.0
MAP: Web Only, Dealer & Distributors please contact firstname.lastname@example.org for ordering information
MIP Pucks™ ‘ARE’ the future of All TLR 22 4.0 Series Kit Vehicles! MIP’s all new Pucks™ Drive system is an aluminum based drivetrain system which includes a 2-piece Alum. Outdrive Cup & Alum. Outdrive Hub, 2 Bi-metal bones, and the replaceable plastic orange wear Pucks™ that take the place of the inferior steel pins. This combination greatly increases the longevity of the drivetrain and most importantly decreases the drivetrains overall rotating mass by a whopping 50%! The decrease in weight directly results in quicker acceleration, deceleration, and lower motor temps! Get the advantage that every stock racer craves!
TLR All 22 4.0 Series Kit Vehicles
Less Rotating Mass
Lower Motor Temps
Less Overall Wear and Tear on Drive Components
Aluminum Based Drivetrain and Aluminum based Outdrive Cup and Outdrive Hub
Decreases rotational weight of the components by 50%
Replaceable Pucks™ to keep your drivetrain fresh
100% Quality made in the USA!
2 - MIP Confetti Sticker
1 - MIP Inst. Sheet
1 - MIP Thread Gel Safety Sheet
1 - MIP Diff Lube & Grease Cup
1 - MIP Lube & Thread Gel Cup
7 - Bearing, 1/16" Chrome Steel Ball
14 - 3/32" Gr. 25 Tungsten Carbide Diff Ball
2 - MIP Diff Ring, TLR 22 "Stock Diff"
1 - Washer, #2, Hardened
1- Diff Spring, 1/4 x 9/32"
1 - Diff Screw, Shoulder, 2-56 x .925, Assoc
1 - MIP Thrust Retainer, .236 Aluminum Bore
2 - Bearing, 5mm x 8mm x 2.5mm
1 - MIP T‐Nut Housing, .250 Bore
1 - MIP T‐Nut Insert, .250 Bore
3 - SHCS, 1‐72 x .250 Cap Screw
7 - BHCS, 1‐72 x 1/8 Button Head, Alloy
2 - Pin, 1/16" x .430" Solid Pin
2 - MIP 3/16" CVD™ Coupling
2 - SHSS, 4‐40 x 3/32" Cup Point
2 - MIP Bi‐Metal R‐CVD™ Yoke, Front, AE B64
8 - MIP Keyed Drive Puck, Ten SCTE
3 - MIP Pucks™, Keyed Puck Pin, No 1.5 Pucks™, 1/10th
2 - MIP Bi‐Metal Outdrive Hub, TLR 22 4.0
1 - MIP Pucks™, 2‐Piece 17.5 Outdrive Cup, Male AE B6
1 - MIP Pucks™, 2‐Piece 17.5 Outdrive Cup, Female, AE B6
2 - MIP Pucks™, 17.5 Bi‐Metal Bone, 68mm, TLR 22 4.0
.050 Allen Key – (Suggest - #9000 MIP Hex Driver Wrench .050 inch)
1.5mm Allen Key - (Suggest - #9007 MIP Hex Driver Wrench 1.5mm)
2.0mm Allen Key - (Suggest - #9008 MIP Hex Driver Wrench 2.0mm)
MIP Performance Upgrade Hop-Up RC Car Option Parts for TLR Losi Radio Controlled Models
#17045 MIP Pucks™, 2-Piece Aluminum Outdrive Cups, M/F Team Associated & TLR 1/10th MSRP:$20.00 UPC:691545170459
#17062 MIP Super Diff, Bi-Metal Hub TLR 22 4.0 (2) MSRP:$18.00 UPC:691545170626
#17065 MIP Super Diff™, Carbide Rebuild Kit, TLR 22 Series MSRP:$24.00 UPC:691545170657
#17141 MIP Pucks™, Bi-Metal R-CVD Bone, 68mm, TLR 22 4.0 (2) MSRP:$30.00 UPC:691545171418
#17132 MIP Pucks™, Bi-Metal R-CVD Bone, 68mm, TLR 22 4.0 (2) MSRP:$30.00 UPC:691545171326
Safety Data at http://miponline.com/store/msds.html
Hi Res Images at http://www.miponline.com/store/media/myparts/ or click any image herein.
*Not Responsible for typographical errors
Write a review | No reviews for this product.
Your MIP Race Bag
Add These Related Products!